-
The Application of 3D Laser Scanning Metal Mine Goaf Survey
In the deep mining of mines, not only has high requirements for mining technology, but also poses a great threat to the safety of mining. In order to ensure the effective and safe operation of mining work, 3D laser scanning technology is used as an advanced measurement technology. , Has been gradually applied in mining. The article analyzes the application of three-dimensional laser scanning technology in the measurement of goafs in metal mines, and provides references for people in the same industry.
2021-08-14
-
How Accurate Is The 3D Printing Parts?
"What is the accuracy of your 3D printed parts?" This is a question often asked by 3D printing practitioners. So what is the accuracy of 3D printing? The answer to this question depends on many factors, the type of 3D printing technology, the status of the 3D printer and the settings of the printing parameters, the selected materials, the model design, etc.
2021-08-21
-
The Origin And Characteristics Of Swiss Machine
Swiss Machine-the full name is the center-moving CNC lathe, it can also be called the headstock mobile CNC automatic lathe, the economical turning-milling compound machine tool or the slitting lathe. It is a precision processing equipment that can complete lathe, milling, drilling, boring, tapping, engraving and other compound processing at one time. It is mainly used for batch processing of precision hardware and shaft special-shaped non-standard parts.
2021-08-21
-
The Exploration And Practice Of 6S Management Mode In Machining Training Teaching
Implement the 6S management mode in the mechanical and electrical professional machining training teaching of higher vocational colleges, organically combine knowledge, ability, and quality education, and integrate the training teaching with the actual production of modern enterprises, which can enable students to establish professional awareness and form good professional habits. , Possess excellent vocational skills to improve professional quality.
2021-08-14
-
The Cost Control And Optimization Of Cnc Machining Process
In the machining process, by controlling and optimizing industrial costs, the goal of saving production costs and improving the economic benefits of the enterprise can be achieved.
2021-08-28
-
Analysis of Difficulties in Machining Gray Cast Iron
The results show that the content of S and P of 26# pig iron was above the high side, the content of Si of 22# pig iron is low, so the chemical compositions do not satisfied criteria. The carbon equivalent of the castings is 4.36%, which is belonging to high carbon equivalent castings.
2021-08-21
-
Performance of Metal Parts Printed by FDM 3D Printing
This article explores the performance characteristics of metal parts produced using FDM technology, addressing aspects such as mechanical properties, surface finish, dimensional accuracy, and potential applications.
2024-07-22
-
The Prototype System Development Of Aerospace Shell
Based on the previous theoretical research, and for the process design requirements of typical shell parts of spacecraft, in order to achieve the extraction of the manufacturing features of the parts, the feature extraction tool is designed based on the Siemens NX10.0 secondary development API.
2021-08-21
-
Manufacturing Process Route Planning Based On Specific Immunity
At present, the process route planning of spacecraft shell parts still mainly relies on the experience of engineers, which cannot adapt to the "multi-type, small-batch" production mode, and there are problems such as low efficiency and uneven quality. Therefore, the research on the intelligent planning of the process route is very necessary.
2021-08-14
-
The Characteristics Analysis Of Machining Surface Micro-Profiles
Taking the machining standard sample as the object, the difference in the surface roughness of different machining surfaces is studied, the characteristics of the surface topography obtained by different machining are analyzed, and the surface topography with different roughness obtained by the same machining method is observed.
2021-08-21
-
CNC Machining Vs Traditional Machining
The CNC machining process is a new type of process technology based on the traditional machining process, which can ensure the accuracy of the parts. The research and development of numerical control machining technology can make machining technology more efficient, better meet the requirements of process production, reduce the investment of production manpower, have high automation characteristics, and have a better prospect in future development.
2020-09-19
-
The Application Of Magnesium Alloy Materials In Lightweight Robots
With the development of modern industry, the types and application fields of robots continue to expand. According to the classification of modern robots, robots can be divided into professional service robots and household service robots. The PTJ processing robot parts industry is also booming.
2020-07-23
- 5 Axis Machining
- Cnc Milling
- Cnc Turning
- Machining Industries
- Machining Process
- Surface Treatment
- Metal Machining
- Plastic Machining
- Powder Metallurgy Mold
- Die Casting
- Parts Gallery
- Auto Metal Parts
- Machinery Parts
- LED Heatsink
- Building Parts
- Mobile Parts
- Medical Parts
- Electronic Parts
- Tailored Machining
- Bicycle Parts
- Aluminum Machining
- Titanium Machining
- Stainless Steel Machining
- Copper Machining
- Brass Machining
- Super Alloy Machining
- Peek Machining
- UHMW Machining
- Unilate Machining
- PA6 Machining
- PPS Machining
- Teflon Machining
- Inconel Machining
- Tool Steel Machining
- More Material
