-
The Automobile Manufacturing Field Vigorously Promotes The Reuse Of Parts
The automobile industry not only uses a lot of materials when manufacturing, but also consumes a lot of fuel during the driving process, and generates a lot of exhaust gas. The materials used to make automobiles contain heavy metals such as lead, mercury, cadmium, and chromium, as well as rubber, plastics, etc. Non-metals such as glass and grease will seriously pollute the environment if left unattended or improperly handled after being discarded.
2021-10-02
-
Mold manufacturers upgrade and transform to achieve a big leap from low-end to high-end
The mold industry must accelerate the adjustment of its development strategy, change the development mode, upgrade the development level, and realize the leap from low-end manufacturing to high-end manufacturing.
2021-10-09
-
The Progress of lightweight aluminum for transportation
As the current upsurge of aluminum deep-machining products, automobile lightweight has naturally ushered in the favor of many companies. Aluminum is the most environmentally friendly green metal with good cnc machining properties, physical properties, mechanical properties and corrosion resistance. Because of its excellent comprehensive performance, aluminum is inseparable from important aerospace vehicles to packaging containers, pots and pans.
2021-11-20
-
Chinese aerospace companies are using 3D printing for missile component manufacturing
Aerospace China (Harbin) Titanium Industry Co., Ltd., affiliated to the Third Research Institute of China Aerospace Science and Industry Corporation, has developed its main business into one of the top ten industries in Heilongjiang Province in only 3 years. All of this is inseparable from the company’s deputy General Manager Liu Zhenjun and his hard-working team.
2021-11-20
-
The added value of the automotive bearing industry will increase by an average annual rate of 7%
Recently, Zhou Yu, secretary-general of the China Bearing Industry Association, said: “In the 13th Five-Year Plan period, the added value of China's automotive bearing industry will increase by an average annual rate of 7%. This indicator is set to meet the needs of the development of the automotive industry.
2021-11-13
-
What do metal manufacturers need to pay attention to when producing alloys?
The metal manufacturer selects the metal to perform the function according to the physical characteristics of the metal: the stainless steel exhaust pipe should be rust-proof; the heat exchanger in the nozzle must be under harsh conditions of use.
2021-11-02
-
What should be paid attention to in the process of electro-galvanizing and nickel-plating?
When I started my career in metal finishing in the mid-1980s, the industry thought about its source and development direction. It is interesting to look back at the time and remember all the changes that have occurred since we entered the 1990s. Environmental issues dominate the industry.
2021-11-02
-
How to use additional tools to design molds?
Additional tools refer to the use of 3D printing (such as direct metal laser sintering or DMLS) to produce mold inserts from metal, which will be used to produce large quantities of 101 molds.
2021-11-02
-
Three new mold surface treatment technologies are here!
The Mold Technology Department (MTD) of the Society of Plastics Engineers (SPE) has been organizing technical lectures at ANTEC conferences for many years. At the beginning of this year, the MTD board of directors went to San Antonio with excitement, held a meeting, and held mold technology discussions with industry and academia. However, the COVID-19 pandemic forced the SPE to review the plan and convert the meeting to an online meeting.
2021-11-02
-
Processing skills of four difficult-to-process metal materials
When selecting challenging metals for processing, economic efficiency is an important consideration. CBN inserts with enhanced chamfered edges eliminate edge cracks that are common when cutting materials with hardness greater than 50 RC.
2021-11-02
-
Additive manufacturing can customize various parts for aviation and medical
Additive manufacturing (AM) is a technology for producing highly customized products from almost any material. Due to design flexibility, 3D printed metal parts can be produced for a variety of applications from aerospace to medical.
2021-11-02
-
High-quality plastic parts can be manufactured using pyrometers
Plastic parts are vital in many different industries. New combinations of materials and manufacturing technologies are being developed, especially in challenging applications such as automotive engineering.
2021-11-02
- 5 Axis Machining
- Cnc Milling
- Cnc Turning
- Machining Industries
- Machining Process
- Surface Treatment
- Metal Machining
- Plastic Machining
- Powder Metallurgy Mold
- Die Casting
- Parts Gallery
- Auto Metal Parts
- Machinery Parts
- LED Heatsink
- Building Parts
- Mobile Parts
- Medical Parts
- Electronic Parts
- Tailored Machining
- Bicycle Parts
- Aluminum Machining
- Titanium Machining
- Stainless Steel Machining
- Copper Machining
- Brass Machining
- Super Alloy Machining
- Peek Machining
- UHMW Machining
- Unilate Machining
- PA6 Machining
- PPS Machining
- Teflon Machining
- Inconel Machining
- Tool Steel Machining
- More Material
