-
Get to know the four metal 3D printing technologies
Metal 3D printing is considered the culmination of all 3D printing. When it comes to strength and durability, nothing can compare to metal. The earliest metal 3D printing patent was DMLS (Direct Metal Laser Sintering), which was obtained by the German EOS in the 1990s.
2021-10-22
-
What is an Engine Lathe & How Does It Work
In the world of precision machining, the engine lathe stands as an enduring symbol of craftsmanship, versatility, and engineering excellence. It's a cornerstone tool in manufacturing and metalworking industries, renowned for its ability to turn raw materials into precise and intricate components
2023-09-29
-
This article takes you to learn more about the process method of aluminum alloy welding
Aluminum alloy welding is very different from the welding of ordinary carbon steel, stainless steel and other materials. It is easy to produce many defects that other materials do not have, and it is necessary to adopt targeted measures to avoid it. Let's take a look at the problems that are prone to aluminum alloy welding and the requirements for welding technology.
2021-10-22
-
The Molding Method Of Industrial Ceramic Machining
Mechanical accessories made of modern industrial ceramics are widely used in military ceramics, textile ceramics, electronic and electrical ceramics, etc. So do you know how industrial ceramics are formed? What are the methods? Kezhong Ceramics will tell you.
2022-05-20
-
Analysis of common quality problems of steel and their causes
The common quality problems of steel are mainly: surface defects, internal defects, and external dimension defects. These three problems will be introduced below:
2021-10-22
-
The Reference For Lost Foam Castings Cost Accounting
Cost analysis is very simple and can include two aspects, namely cost increase factors and cost reduction factors. The difference between these two factors is the amount of cost increase or decrease after the lost foam casting process is adopted.
2021-11-27
-
What factors affect the appearance of argon arc welding porosity?
Aiming at the common vent problems in manual argon arc welding, based on the author's years of work experience in manual argon arc welding, the reasons for the pores in argon arc welding are analyzed, and some solutions and attention are introduced. matter. Help welders to deal with such problems encountered in actual production, and better master the manual tungsten argon arc welding technology.
2021-10-22
-
The Application Of Intelligent Production In Lost Foam
Our company began to study intelligent production in 2014, and many research results have been practically applied to our products. Especially in December 2020, our company signed an intelligent lost foam production line with Maanshan Haitian Heavy Industry, which will fully apply our intelligent production products in recent years to this production line.
2021-11-13
-
How much do you know about the welding tips of galvanized steel pipes?
Galvanized steel pipe has the dual advantages of corrosion resistance and long service life, and the price is relatively low, so its utilization rate is getting higher and higher, but some users do not pay attention when welding galvanized pipe. Caused some unnecessary troubles.
2021-10-22
-
The Role Of Coatings In Lost Foam Casting Production Process
A special drying room is used to increase and maintain the temperature of the drying room by burning coal, gas, electric power, geothermal, steam, etc., and special equipment is used to discharge moisture to achieve the effect of dehydration, dehumidification and drying.
2021-11-20
-
Is The Automotive Shell After Laser Welding Really Better?
In the automotive field, the concept of laser welding was first introduced to China by Volkswagen, and it has a history of more than ten years. In the mouth of the salesperson, it is the main reason why Volkswagen is durable. Many friends around me also choose Volkswagen because of this "safer" laser welding.
2021-10-09
-
What are the welding methods?
Welding is "the process of joining metals or non-metals locally by heating the material to the welding temperature, applying pressure or not, or only by applying pressure, with or without the use of filler materials," and joining means "connecting together" , So welding refers to the operation activity of realizing connection.
2021-10-21
- 5 Axis Machining
- Cnc Milling
- Cnc Turning
- Machining Industries
- Machining Process
- Surface Treatment
- Metal Machining
- Plastic Machining
- Powder Metallurgy Mold
- Die Casting
- Parts Gallery
- Auto Metal Parts
- Machinery Parts
- LED Heatsink
- Building Parts
- Mobile Parts
- Medical Parts
- Electronic Parts
- Tailored Machining
- Bicycle Parts
- Aluminum Machining
- Titanium Machining
- Stainless Steel Machining
- Copper Machining
- Brass Machining
- Super Alloy Machining
- Peek Machining
- UHMW Machining
- Unilate Machining
- PA6 Machining
- PPS Machining
- Teflon Machining
- Inconel Machining
- Tool Steel Machining
- More Material
