-
Introduction to the cleaning method of plastic extrusion molding machine
In plastic extrusion molding equipment, the plastic extruder is usually called the main machine, and the subsequent equipment that is matched with the plastic extrusion molding machine is called the auxiliary machine. After more than 100 years of development, plastic extruders have derived from the original single-screw, multiple-screw, multi-screw, and even non-screw models.
2021-11-12
-
The design scheme of PVC plastic formula
Pure polyvinyl chloride (PVC) resin belongs to a kind of strong polar polymer, and its intermolecular force is relatively large, which leads to higher softening temperature and melting temperature of PVC. Generally, it needs 160~210℃ to process.
2021-11-12
-
Control scheme of flow mark in polishing process
So far, the most widely used system for chemical polishing of aluminum and its alloys is a mixed solution of sulfuric acid-phosphoric acid-nitric acid, copper and additives (hereinafter referred to as the triacid system). This system is widely used in domestic and foreign production lines under different commercial names for its advantages of easy maintenance, wide control range of triacid ratio, polishing temperature, water content, moderate polishing time, and high product measurement.
2021-11-12
-
The application of polishing equipment in the metal industry
The history of polishing process is very long and it is widely used. However, the efficiency of traditional polishing process is really very low, which is not in line with the current industrial development, so the emergence of polishing equipment is a very inevitable thing. NS.
2021-11-12
-
Precautions for installation of twin screw extruder
The twin-screw extruder must be operated according to the operating process: First of all, the acceptance of the equipment out of the box is the first step for the acceptance of the twin-screw extruder into the factory.
2021-11-12
-
Solution to the wear problem of the open bearing rubber mixer
The open-bearing rubber mixing machine is mainly composed of rollers, frames, glands, pitch adjustment devices, safety devices, motors and transmission devices, braking devices, lubrication systems, cooling systems, and electrical control systems.
2021-11-12
-
Characteristics of insert injection molding technology
Insert molding (molding) refers to a molding method in which a pre-prepared insert of dissimilar materials is put into a mold and then resin is injected, and the molten material is joined and solidified with the insert to make an integrated product. Out-sert molding refers to a method of embedding injection molded parts on a part of a metal plate surface.
2021-11-12
-
Aluminum alloy smelting method and process flow
The smelting methods used in the domestic aluminum industry generally include batch smelting and semi-continuous smelting. The batch smelting method refers to a smelting method that takes one smelting time as a cycle, from the beginning of furnace loading and melting to the end of refining and downturning.
2021-11-12
-
Brief Introduction of Semi-solid Forming Technology of Magnesium Alloy
Semi-solid forming technology, also known as semi-solid die forging or thixotropic die forging, is a new part processing technology, which is an advanced forming technology between liquid forming (casting) and solid forming (pressure processing).
2021-11-12
-
The Temperature Of Magnesium Alloy Forging Forming Key Factors
At present, the main forming method of magnesium alloy products is casting, especially die-casting parts. However, the performance, reliability, yield, material utilization rate and equipment capacity of die-casting products are restricted, and cannot meet the requirements of aviation, military and other fields.
2021-11-12
-
Common surface treatment methods for aluminum profiles
Surface treatment is a process of artificially forming a surface layer on the surface of the base material that is different from the mechanical, physical and chemical properties of the base. The purpose of surface treatment is to meet the product's corrosion resistance, wear resistance, decoration or other special functional requirements. Common surface treatment methods for aluminum profiles:
2021-11-12
-
Quality Evaluation Method of Sintered NdFeB Magnet
Sintered neodymium iron boron magnets are a kind of permanent magnets, because of their high cost performance, they are widely used in many fields, such as computer hard disks, nuclear magnetic resonance imaging, electric vehicles, wind power generation, industrial permanent magnet motors, consumer electronics and magnetic machinery, magnetic levitation technology , Magnetic transmission and other industries.
2021-11-12
- 5 Axis Machining
- Cnc Milling
- Cnc Turning
- Machining Industries
- Machining Process
- Surface Treatment
- Metal Machining
- Plastic Machining
- Powder Metallurgy Mold
- Die Casting
- Parts Gallery
- Auto Metal Parts
- Machinery Parts
- LED Heatsink
- Building Parts
- Mobile Parts
- Medical Parts
- Electronic Parts
- Tailored Machining
- Bicycle Parts
- Aluminum Machining
- Titanium Machining
- Stainless Steel Machining
- Copper Machining
- Brass Machining
- Super Alloy Machining
- Peek Machining
- UHMW Machining
- Unilate Machining
- PA6 Machining
- PPS Machining
- Teflon Machining
- Inconel Machining
- Tool Steel Machining
- More Material
