-
Low-cost automatic 3D printing prosthetic production line
Scientists at the Technion-Israel Institute of Technology have developed an automated production line for 3D printing low-cost custom prostheses.
2021-11-19
-
Copper prices have risen to a nine-year high, why the rapid rise will affect the downstream
Copper is mainly used in electric power, home appliances, construction, new energy vehicles and other industries, and is closely related to our daily lives. The price of copper ushered in a rapid increase in early February this year.
2021-11-19
-
Nanodiamonds are very suitable for the needs of advanced photocathodes
In the production of high-quality electron beams, as found in the most advanced scientific equipment such as free electron lasers, ultrafast electron diffraction and imaging, and wake field accelerators, scientists regard photocathode technology as a way of converting light into electrons. method. These tools provide researchers with a way to penetrate materials, atomic structure, and behavior more deeply under actual conditions.
2021-11-19
-
Fast 3D printing method to increase the traditional 3D printing speed by 10 to 50 times
A machine was immersed in a translucent yellow slimy shallow bucket and pulled out a life-size hand. Can you imagine this scene happened in real life?
2021-11-19
-
High-performance ODS alloy can be used in nuclear fission and fusion reactors
Researchers at Texas A&M University recently demonstrated the excellent properties of a new type of oxide dispersion strengthened (ODS) alloy, which they developed for use in fission and fusion reactors.
2021-11-19
-
Engineers use light to improve 3D printing speed and accuracy
The speed of light has entered 3D printing. Engineers at Northwestern University have developed a new method that uses light to increase the speed and accuracy of 3D printing, while also combining it with a high-precision manipulator so that each layer can be moved, rotated, or expanded freely while constructing the structure.
2021-11-19
-
The profits of the electrolytic aluminum industry are "rising"
The introduction of the “double carbon” policy has almost ruled out the possibility of the future release of the electrolytic aluminum supply ceiling, which has greatly eased the pressure of domestic electrolytic aluminum overcapacity.
2021-11-19
-
3D printing of living cell structures with meso and microstructures
The combination of two-photon polymerization (2PP) 3D printers with innovative hydrogel-based bio-inks can directly 3D print structures containing meso-scale and micro-scale living cells. NanoUp Bio, developed by UpNano GmbH, is a 3D printer based on the NanoOne series of laser-driven two-photon polymerization. The printer can construct 12 orders of magnitude structure.
2021-11-19
-
3D printing materials can replace ivory to restore old cultural relics with high precision
For centuries, ivory has often been used to make works of art. However, in order to protect the number of elephants, the ivory trade was banned internationally in 1989. Therefore, in order to restore the ivory part of the old artwork, people must resort to alternative materials such as bones, shells or plastics. However, so far there has not been a truly satisfactory solution.
2021-11-19
-
3D printing of thermoplastic materials using embedded media in free form
Fused Deposition Modeling (FDM) and Direct Ink Writing (DIW) have successfully demonstrated the manufacture of thermoplastic 3D free structures involving overhanging (non-anchored) structures, but they are limited in applicable materials and printing conditions. Free-structure 3D printing requires supporting materials that can print thermoplastics in non-anchored locations.
2021-11-19
-
New process for 3D printing graphene aerogel
Graphene is good at removing pollutants in water, but this magical material is not yet commercially viable. This situation may change.
2021-11-19
-
YBCO superconducting bulk material 3D printing preparation technology has made new breakthroughs
High-temperature superconducting YBCO bulk materials have excellent performance in non-contact magnetic levitation, energy storage rotating machinery, quasi-permanent magnets, mixers, magnetic lenses, portable medical equipment, and filters due to their high critical temperature, high critical current density and high trapping magnetic field.
2021-11-19
- 5 Axis Machining
- Cnc Milling
- Cnc Turning
- Machining Industries
- Machining Process
- Surface Treatment
- Metal Machining
- Plastic Machining
- Powder Metallurgy Mold
- Die Casting
- Parts Gallery
- Auto Metal Parts
- Machinery Parts
- LED Heatsink
- Building Parts
- Mobile Parts
- Medical Parts
- Electronic Parts
- Tailored Machining
- Bicycle Parts
- Aluminum Machining
- Titanium Machining
- Stainless Steel Machining
- Copper Machining
- Brass Machining
- Super Alloy Machining
- Peek Machining
- UHMW Machining
- Unilate Machining
- PA6 Machining
- PPS Machining
- Teflon Machining
- Inconel Machining
- Tool Steel Machining
- More Material
