-
3D printed electronic fibers can be used to make wearable breathing sensors
Researchers at the University of Cambridge used 3D printing technology (also known as additive manufacturing) to create electronic fibers, each of which is 100 times thinner than human hair, creating a sensor that surpasses traditional film-based equipment.
2021-11-23
-
Method for cutting 2D materials with high precision
Materials all have their own set of properties-for example, they can be insulating, semiconducting, metallic, transparent or flexible. Some combine several very useful properties, such as 2D materials.
2021-11-23
-
A 3D printing technology that can promote the manufacture of micro-medical devices inside the human body
Researchers at the National Institute of Standards and Technology (NIST) have developed a new method for 3D printing gels and other soft materials. The research was published in a new paper, and it has the potential to create complex structures with nanometer precision.
2021-11-23
-
Researchers develop new methods for renewable polyurethane
NREL researchers have developed a groundbreaking method that uses non-toxic resources such as linseed oil, waste oil and even algae to produce renewable polyurethane without toxic precursors. This is a breakthrough that has the potential to green the market for footwear, automobiles, mattresses and other products.
2021-11-23
-
Laser reversal can realize 3D printing of multiple materials
3D printing uses digital manufacturing processes to make components that are lightweight, strong, and can be produced without special tools.
2021-11-22
-
AI software enables real-time 3D printing quality evaluation
Researchers at Oak Ridge National Laboratory have developed artificial intelligence software for powder bed 3D printers that can assess the quality of parts in real time without the need for expensive characterization equipment.
2021-11-22
-
Nanocylinder vibration helps quantify 3D printed polymer curing
Researchers from the National Institute of Standards and Technology (NIST) have taken a step towards making more precise and uniform 3D printed parts (such as personalized prosthetics and dental materials), demonstrating a way to measure the rate of microscopic areas of liquid raw materials The method will harden into strong plastic when exposed to light.
2021-11-22
-
Make electrons "pass through" the artificial crystal lattice with extremely high precision
Researchers in the Department of Physics and Astronomy have created a technique that allows them to "sketch" electronic patterns into programmable quantum materials: lanthanum aluminate/strontium titanate or "LAO/STO".
2021-11-22
-
3D printing "speed limit" can greatly improve the pass rate of products
In a project jointly developed by China and the United States, researchers discovered the "speed limit" of powder bed fusion (PBF) 3D printing, under which the possibility of defects in parts is less.
2021-11-22
-
3D printing graphene oxide method is coming
On December 14th, researchers from the Institute of Ceramics and Glass (ICV) and the Institute of Microelectronics and Nanoscience of the University of Aix-Marseille in Spain have used 3D printed graphene oxide scaffolds as the basis for lightweight hybrid structures.
2021-11-22
-
Oversupply of polyethylene is difficult to get rid of
Recently, Rob Stier, senior director of petrochemicals at S&P Global Platts Analytics, said: “As capacity returns to the market, supply will increase, and demand is unlikely in the short term. There is a strong recovery, so polyethylene prices in the global market will be under pressure in 2021.”
2021-11-22
-
Citrus peel development bio-based PEF plastic new technology comes out
The new technology developed by VTT can use pectin-containing agricultural wastes (such as citrus peel and beet pulp) as raw materials for bio-based PEF plastics to replace fossil-based PET.
2021-11-22
- 5 Axis Machining
- Cnc Milling
- Cnc Turning
- Machining Industries
- Machining Process
- Surface Treatment
- Metal Machining
- Plastic Machining
- Powder Metallurgy Mold
- Die Casting
- Parts Gallery
- Auto Metal Parts
- Machinery Parts
- LED Heatsink
- Building Parts
- Mobile Parts
- Medical Parts
- Electronic Parts
- Tailored Machining
- Bicycle Parts
- Aluminum Machining
- Titanium Machining
- Stainless Steel Machining
- Copper Machining
- Brass Machining
- Super Alloy Machining
- Peek Machining
- UHMW Machining
- Unilate Machining
- PA6 Machining
- PPS Machining
- Teflon Machining
- Inconel Machining
- Tool Steel Machining
- More Material
