-
New flame-retardant composite materials come out!
Epoxy resin (EP) is an important thermosetting material. Because of its excellent chemical resistance and stability, good optical transmittance and adhesion, it is widely used in adhesives, coatings and advanced nanocomposite materials.
2021-11-25
-
3D printing technology replicates the Damascus steel manufacturing process
Recently, according to foreign media reports, Damascus steel is hard and tough, mainly because it is composed of different alloy layers. In ancient times, this was the preferred material, especially the blade material.
2021-11-25
-
Significant progress has been made in the research of 3D printing dot matrix structure
Lightweight lattice structures have broad application prospects in the fields of load bearing, energy absorption, heat insulation, and shock isolation. The use of 3D printing to manufacture lattice structures has the characteristics of high efficiency and flexibility, and has also become an important application in the field of 3D printing.
2021-11-25
-
Highly functional graphene 3D printing material was born
Recently, a research team from Zhejiang University used the solvation effect of glycerol molecules on graphene oxide to design a graphene oxide/glycerin 3D printing ink. This research has opened up the scope of new three-dimensional graphene frame materials and laid the foundation for the application of graphene materials in the fields of energy storage, composite materials, catalysis and other fields.
2021-11-24
-
What are the commonly used materials for 3D printing?
ABS is currently the most widely used polymer. It combines various characteristics of PS, SAN, BS, and has the characteristics of hard, hard, and hard. abs is a terpolymer of acrylonitrile, butadiene and styrene. A represents acrylonitrile, B represents butadiene, and S represents styrene.
2021-11-24
-
New iron-based alloy materials
Japanese scientists are committed to extending the limit of superelastic materials and have made major breakthroughs. They showed a new iron-based alloy that can withstand extremely high and extremely low temperatures.
2021-11-24
-
Will the United States impose an additional 10% aluminum tariff on Canada affect international aluminum prices?
US President Trump signed an announcement on the 6th, announcing the resumption of 10% tariffs on some aluminum products imported from Canada.
2021-11-24
-
The 3D printed electrode effectively solves the bubble problem in the electrolysis process
The picture shows the designed 3D electrode: it manages the bubble migration in the gas escape reaction at high current density.
2021-11-24
-
Using gel balls as the material for stone polishing, it can be polished very well without pollution!
In order to realize the green production of sealing stones, a new type of sol-gel polishing tool composed of gel balls was developed, and its processing performance and degradability were evaluated. Through different molding and drying methods, small-sized gel balls were obtained.
2021-11-24
-
The new semi-solid casting material can be widely used in the manufacture of automobile mechanical parts!
A357 type (Al-Si-Mg) aluminum semi-solid casting material is known for its excellent strength and good ductility. It is the material of choice and is ideal in the manufacture of automotive mechanical moving parts.
2021-11-24
-
The newly launched laser cladding technology can effectively improve the wear resistance of composite coatings!
In order to improve the performance of the cladding layer, this study uses the Taguchi design to study the effects of laser power, scanning speed, gas flow and SiC powder ratio on the microhardness and wear volume of the cladding layer.
2021-11-24
-
The zinc oxide nanowires with controllable size were prepared by a combination of die casting and oxidation.
Electronic equipment has undergone a huge transformation in the past ten years, from rigid systems to flexible systems, and is currently evolving to retractable systems.
2021-11-24
- 5 Axis Machining
- Cnc Milling
- Cnc Turning
- Machining Industries
- Machining Process
- Surface Treatment
- Metal Machining
- Plastic Machining
- Powder Metallurgy Mold
- Die Casting
- Parts Gallery
- Auto Metal Parts
- Machinery Parts
- LED Heatsink
- Building Parts
- Mobile Parts
- Medical Parts
- Electronic Parts
- Tailored Machining
- Bicycle Parts
- Aluminum Machining
- Titanium Machining
- Stainless Steel Machining
- Copper Machining
- Brass Machining
- Super Alloy Machining
- Peek Machining
- UHMW Machining
- Unilate Machining
- PA6 Machining
- PPS Machining
- Teflon Machining
- Inconel Machining
- Tool Steel Machining
- More Material
