-
"TwoCure" New Light Curing 3D Printing Technology
On October 11th, a new light-curing 3D printing technology called TwoCure was invented. It is a 3D printing method based on SLA, manufactured by the Fraunhofer Institute of Laser Technology in Germany and a German prototype.
2021-12-07
-
Research and develop new 3D printing anti-vibration materials
On October 8th, scientists at the University of Surrey and researchers at Johns Hopkins University in Baltimore and the University of California have developed a new type of 3D printing material with high stiffness and damping.
2021-12-07
-
Seeking a green development path for the non-ferrous metal industry
As China's economic development gradually enters the new normal phase of pursuing stability, sustainability, and comprehensive development, the construction of ecological civilization and environmental protection have received more and more attention from the state.
2021-12-07
-
Multifunctional 3D printer can print "smart" objects
On September 27th, researchers from Purdue University's School of Technology and Engineering are working to develop a multifunctional 3D printer that can print "smart" objects, including entire mobile phones.
2021-12-07
-
ALTA developed a 3D printed "smart balloon"
News on September 19th, with the help of 3D printing technology, ALTA Tactical from Florida, USA has developed a low-altitude imaging device SmartBalloon (meaning smart balloon) that only relies on balloon drive to replace the current noise and energy consumption High drone.
2021-12-07
-
Alumina has soared 60% this year
Due to tight supply, alumina prices may reach a record high before the end of the year. It is worth noting that in May of this year, alumina has skyrocketed by 60%.
2021-12-07
-
Researched out a new type of tungsten alloy that can withstand ultra-high radiation
It was reported on March 5 that the journal "Science Advances" recently published an article that researchers at Los Alamos National Laboratory in the United States have developed a new type of tungsten alloy that can withstand ultra-high radiation.
2021-12-07
-
Weld metal and glass with ultra-fast laser pulses
Understand, Heriot-Watt University (Heriot-Watt University) scientists claim a breakthrough method that can weld materials such as glass and metal together, thanks to ultrafast laser pulses. Traditionally, welding is limited to materials with similar characteristics, so even welding aluminum and steel together is difficult.
2021-12-07
-
Method for predicting the formation of metal 3D printing defects
In the 3D printing process, if gas is trapped in the metal powder supplied to the 3D printer, tiny air pockets may appear. These areas have a Swiss cheese-like structure, are less dense and weaker than the surrounding environment, which can cause cracks and other failures.
2021-12-07
-
How 3D printer-made models can improve fracture treatment
Chinese researchers are studying the use of 3D printers to make models to improve fracture treatment. Huachen from the Department of Orthopedics of the Second Affiliated Hospital and Yuying Children's Hospital of Wenzhou Medical University, Zhejiang, explained their randomized clinical trial in discovering and treating fractures in "Using 3D printer-made models to improve fracture treatment efficacy".
2021-12-07
-
3D printer manufacturing sports protection equipment
Sports can not only improve our quality of life, but also play an important role in promoting our quality. However, some strenuous sports can also cause harm to our body and mind. Therefore, we must continue to study some equipment to improve our safety.
2021-12-07
-
Feasibility study on custom-made ankle and foot orthosis with 3D printer
3D printers have played a huge and diverse role in medical and other aspects. Researchers from the University of Sydney recently published a "Systematic Evaluation of the Feasibility of Designing, Manufacturing and Providing 3D Printed Ankle and Foot Orthotics" outlining traditionally manufactured ankle and foot orthoses ( AFO) and the wide manufacturing potential of 3D printers and sanitation services.
2021-12-07
- 5 Axis Machining
- Cnc Milling
- Cnc Turning
- Machining Industries
- Machining Process
- Surface Treatment
- Metal Machining
- Plastic Machining
- Powder Metallurgy Mold
- Die Casting
- Parts Gallery
- Auto Metal Parts
- Machinery Parts
- LED Heatsink
- Building Parts
- Mobile Parts
- Medical Parts
- Electronic Parts
- Tailored Machining
- Bicycle Parts
- Aluminum Machining
- Titanium Machining
- Stainless Steel Machining
- Copper Machining
- Brass Machining
- Super Alloy Machining
- Peek Machining
- UHMW Machining
- Unilate Machining
- PA6 Machining
- PPS Machining
- Teflon Machining
- Inconel Machining
- Tool Steel Machining
- More Material
