-
Detailed Marine Propeller Machining Process List
The structure of marine propellers is relatively complicated. The difficulty of numerical control processing lies in the processing of complex curved surfaces, including blade surface, blade back, blade root fillet and hub surface.
2019-12-21
-
What Is Cnc Cutting?
CNC cutting technology is an organic combination of traditional processing technology and computer numerical control technology, computer aided design and auxiliary manufacturing technology. CNC cutting consists of two parts: the numerical control system and the mechanical structure. Compared with traditional manual and semi-automatic cutting, CNC cutting can effectively control and improve cutting quality and cutting efficiency through the cutting technology, cutting process and automatic control technology provided by the numerical control system.
2019-02-15
-
Jinzhu Gold Supplier Recommended-CNC Supper Stroke Machining Case
Customized disc processing aluminum sheet iron plate processing machinery parts according to drawings
2019-03-02
-
PTJ character Introduction:Boss zhou hanping
Zhou hanping began his career in manufacturing at Foxconn Factory in shenzhen, china in 2003. He progressed through roles as a machine General Foreman, Manager, and finally, Foxconn CNC machining manager. He has experience in a variety of machining and specialized processes.
2019-03-02
-
The prospect of mould industry
Our country is gradually moving towards a powerful country of mould making from the big country of mould production. As far as the domestic market is concerned, the production and demand of the mould industry are booming, the investment enthusiasm of the enterprises is rising, and the large technical renovation projects and new projects are constantly appearing.
2019-03-04
-
Global Qucik Development Of Hardware Industry
Due to the rapid development of hardware parts production technology and the impact of high labor costs, developed countries have accelerated the transfer of low and medium-grade products to the third world, producing only some high-value-added products.
2019-03-04
-
Process Genus Wire cutting
Wire cutting is the abbreviation of numerical control electric discharge wire cutting processing, which is developed on the basis of electric spark perforation and forming processing.
2019-03-02
-
Structural changes of titanium alloy rods during hot extrusion
The appearance of titanium rods is very similar to steel, with a density of 4.51 g / cm3, which is less than 60% of steel. It is the lowest density metal element among refractory metals.
2020-05-16
-
What is dimensional chain
There are two characteristics of the dimensional chain: closedness-each size of the dimensional chain constitutes a closed system in a certain order; correlation-one of the size changes will affect other size changes.
2020-04-25
-
Skills Of Using U Drill On CNC Machine Tool
Compared with the integral drill, the U-drill is a tool that performs hole machining by combining a center blade (inner edge) and an outer periphery blade (outer edge). This structure determines that the U-drill has an irreplaceable advantage over other drilling tools.
2020-04-11
-
CNC Machine Coordinate System
In the process of writing a CNC machining program, in order to determine the relative position of the tool and the workpiece, the movement path of the tool must be described through the machine tool reference point and the coordinate system.
2020-04-11
-
Workpiece installation and its fixtures
Direct mounting method The workpiece is directly placed on the machine table or general fixture (such as standard accessories such as three-jaw chuck, four-jaw chuck, flat-nose pliers, electromagnetic chuck, etc.), and sometimes it is clamped without finding another correct
2020-04-11
- 5 Axis Machining
- Cnc Milling
- Cnc Turning
- Machining Industries
- Machining Process
- Surface Treatment
- Metal Machining
- Plastic Machining
- Powder Metallurgy Mold
- Die Casting
- Parts Gallery
- Auto Metal Parts
- Machinery Parts
- LED Heatsink
- Building Parts
- Mobile Parts
- Medical Parts
- Electronic Parts
- Tailored Machining
- Bicycle Parts
- Aluminum Machining
- Titanium Machining
- Stainless Steel Machining
- Copper Machining
- Brass Machining
- Super Alloy Machining
- Peek Machining
- UHMW Machining
- Unilate Machining
- PA6 Machining
- PPS Machining
- Teflon Machining
- Inconel Machining
- Tool Steel Machining
- More Material
